Shaker style was known for his simplicity of style and design and its focus on function over form. Creating a look at shaker style cabinets is a way to update a wardrobe-face on a plain nicer profile while still keeping the simple enclosure.
Instructions to update shaker style cabinets: remove the cabinet door of the cabinet and remove all hardware and door hinges. Measure the width of the door and cut two pieces of cardboard room-by-2 1/2-inch. Place a table horizontally on top of the door and align the corners. Place the second board horizontally along the bottom edge of the cabinet door and fasten.
11 Photos Gallery of: How to Update Shaker Style Cabinets
Measurement between the top and bottom fastened together. Cut two pieces of board 1/4 2 1/2-inch. Place the first table aligned vertically to the left side and the second board flush right. Apply a bead of wood glue to the back of each card and press the board back into the position fit test before.
Remove the clamps. Wood fill cracks or holes, and scrape clean with a spatula. Let it dry. Paint with primer paint. Let it dry. Place the cabinet door to the cabinet using the same points of articulation. Finally, to update shaker style cabinets, add new hardware.